clock instructions for radios i own

I always forget how to set the clock on my radios, so I am including the instructions here as a reference for myself and others. I set the clocks on my radios according to UTC rather than local time.

All of these instructions assume that the radio is turned off first.

Eton E5

• hold the "page/time" button for 2-3 seconds
• the hours will flash, during which time the knob can be turned to change the hours
• press the "page/time" button to change the focus to the minutes
• the knob can then be turned to change the minutes
• while the numbers are flashing, F1-F7 can be pressed to set the weekday to 1-7 as desired
• pressing "page/time" while the minutes are flashing will exit clock editing mode

Kaito KA 11

• press "enter" button twice (this causes the clock icon to flash for 6 seconds)
• when the clock icon is flashing, press the number buttons to set the current time

To change between 12/24 hour modes:

• disconnect the power adapter and remove batteries; wait for the display to clear
• connect the power adapter or insert batteries. "SET" will appear on the LCD
• quickly press "enter" button twice. "12-24" will appear on the LCD
• press "1" for 12-hour mode or press "2" for 24-hour mode

Kaito KA 1102

• press "enter" button twice (this causes the clock icon to flash for 6 seconds)
• while the clock icon is flashing, press the number buttons to set the current time

To change between 12/24 hour modes:

• disconnect the power adapter and remove batteries; wait for the display to clear
• connect the power adapter or insert batteries. "SET" will appear on the LCD
• quickly press "enter" button twice. "12-24" will appear on the LCD
• press "1" for 12-hour mode or press "2" for 24-hour mode

Sony ICF SW7600GR

• hold the "local time set" button and press the left/right (inside plus/minus) buttons to set the time difference between local time and UTC
• to set daylight saving time, press DST so the clock icon appears
• hold the "local time set" button and press the left/right (outside plus/minus) buttons to set the local time

Tecsun PL-350

• press and hold the time set button (bottom left of the keypad)
• enter the current time using four digits and 24-hour time
• press the time set button again